Here is a list of components that I typically use when doing a dual tank system that utilizes manual valves.
*****
-Links in BOLD-
*****
3-Port Manual Valves - 1/2" NPT Apollo ball valves
-
1/2" AC Delco Fuel Hose (Repackaged Gates 4219XL) - This is my go-to hose for the supply side of most dual tank setups. It is repackaged Gates Barricade (only cheaper) hose which is rated for all sorts of fuels. I've personally cut this hose open after 5 years of WMO service and the inside of the hose still looks new.
-
3/8" AC Delco Fuel Hose (Repackaged Gates 4219XL) - 3/8" version of the hose listed above.
-
5/16" AC Delco Fuel Hose (Repackaged Gates 4219XL) - 5/16" version of the hose listed above.
-
Non-Heated Filter Head - Remote mount filter head w/ 1/2" NPT ports.
-
Baldwin BF1212 Filter - This filter fits the above non-heated filter head.
-
1/2" Straight Barb - 1/2" NPT straight barb for 1/2" hose.
-
-As an Amazon Affiliate, I earn a small commission from the Amazon products linked above. This does not affect your pricing and is just another way to show support. These are the parts I use and the best shipped prices I've found.